You are here

Induction Bending

Induction Bending Solutions by Proclad

Proclad Induction Bending is a global supplier of induction bending solutions with unrivalled capacity and expertise.

The company was originally established in the 1980s and has gained extensive experience in delivering world class service and solutions.

What makes us the leading induction bending solutions provider?

  • 5 induction bending machines from 2” to 42”
  • Bending of clad pipes from 6” (150mm)
  • Capable of manufacturing up to 180 degree bends
  • Pipe thickness ranging from 0.25”(6mm) to 4” (100mm)
  • Ability to achieve multiple bends and swirls on a single length of pipe
  • Intelli-bend critical recording and control process
  • Fully accredited 
  • Total value engineering approach to provide high quality cost effective solutions
  • Extensive inhouse heat treatment solutions for post induction bending treatment
  • Global supply network

And with the backing of the global Proclad Group, we can deliver our Total Value Engineering solution which enables clients to enjoy significant cost benefits from economies of scale from our international power base; this avoids multiple mark ups and allows us to take full control of quality and lead times.

Our dedicated project managers provide a single point of contact from the initial enquiry through to final despatch.

Proclad Intelli-Bend System – Critical Performance Recording

The Proclad Intelli-Bend System continually measures and records the critical manufacturing variables of Feed, Speed, Temperature (Intrados and Extrados), Air Pressure, Water Pressure and Power used and presents them on a computerised dashboard for reporting as part of our quality assurance programme. This provides you with an unrivalled level of quality assurance that meets the most stringent of requirements and accreditations.

Our Intelli-Bend system also enables us to demonstrate and document the level of quality, accuracy and control we offer throughout our process. 

Materials Capabilities

We work with an extensive range of materials including, but not limited to:

  • any grade of carbon
  • low alloy steels
  • stainless steels
  • duplex
  • super duplex
  • clad materials

Sectors Served

  • Oil and Gas
  • Power Generation
  • Chemical Processing
  • Nuclear
  • Renewable Energy 

To find out more or to discuss your requirements contact us now.

Download our Induction Bending Brochure Now

Projects

Operator/Project Client Scope of Work
PERTAMINA - PPGJ Indonesia Project IKPT Logo IKPT & Adhikarya Joint Venture, Indonesia Clad Pipes Clad Fittings, Clad Flanges, Clad Bends, Clad Barred Tees (Weld Overlay)
PERTAMINA - Donggi Project, Indonesia Rekayasa Logo Rekayasa, Indonesia Alloy 825 Clad Pipes and bends (Weld overlay)
Exxon Mobil - Damar gas Project, Malaysia PSI Logo PSI (Petronas), Malaysia Alloy 825 Clad Pipes and Bends (weld overlay); Monel Sheathing
ZIRKU Facilities Oily Water Treatment And Disposal Project NPCC Logo NPCC, UAE 10" to 24" Alloy 625 Clad Pipes Bends (weld overlay)
PDO - Ghaba North Redevelopment Project PDO Logo Petroleum Development Oman Alloy 625 Clad Pipes, Flanges & Fitting
BP - Shah Deniz 2 Project, Azerbaijan (Future Flanks) BP BP, UK Alloy 625 Clad Pipes Bends (weld overlay)
B-Series and N15 & N16-6 well platform project, India NPCC Logo NPCC, UAE Alloy 625 Clad Pipes and Bends
PETROBRAS - Various FPDOs (P-68, P-71, P-74, P-76) Phoceene Group Geneyor Logo Phoceene Group Geneyor, France 6" to 24" Alloy 625 Clad Pipes, Fittings and Bends (weld overlay)
BP - Isabella Project Cameron Houston Logo Cameron Houston 8” x 31.8mm and 10” x 38.1mm Pipe and Induction Bends, Fittings
BP - Skarv Project BP Logo BP - Norway 10” and 12” Pipe and Induction Bends, Fittings
BP - Block 31 - PSVM HEEREMA Logo Heerema - Holland 10” x 27.7mmand 12” x 24.7mm Pipe and Induction Bends / Elbows
Chevron Erskine Project Technip Logo Technip (UK) Aberdeen 10” X 21.44mm Pipe and Fittings, Tees
BP Azeri Project Phase 2 HPF Logo HPF Energy Service
Shell - Bonga NW Project GE Logo Ge Vetco - Norway 6” x 18.3mm Pipe, Induction Bends and associated fittings
SHELL – URSA PRINCESS PROJECT Shell Logo Shell - Houston 8” x 31.8mm Pipe
PETROBRAS – ALBACORA PROJECT Aker Logo Aker Solutions - Brazil 5” X 18.3mm Pipe and Induction Bends
NOBLE ENERGY – ASENG PROJECT. Cameron Houston Logo Cameron Houston 8” and 10” Induction Bends and Pipe, Tees
BP CLAIR RIDGE PROJECT Aker Logo Aker Verdal - Norway 12” x 21.44mmwt, Pipe and Induction Bends
CHEVRON – GUJV GORGON PROJECT GE Logo GE - Aberdeen 8” x 18.3mmwt Pipe and Induction Bends
HESS – SOUTH ARNE PROJECT Subsea 7 Logo Subsea 7 - Norway 8” and 10” Pipe and Induction Bends
Total - Kaombo Sumitomo Logo Sumitomo 10" & 12" Pipe and Induction Bends
BP SHAH DENIZ PHASE 2 FTV Logo FTV UAE 16" Induction Bends
BP SHAH DENIZ FUTURE FLANKS FTV Logo FTV UAE 16" Induction Bends
BP JUNIPER One Subsea Logo One Subsea - Leeds 10" Induction Bends
PETROBRAS PROJECTS One Subsea Logo One Subsea - Leeds 6" Clad Gooseneck Turnkey Fabrications
TULLOW OIL - TULLOW TEN FMC Logo FMC - Houston 6" & 8" Induction Bends
SHELL - BONGA NW PROJECT GE Logo Ge Vetco - Norway 6" x 18.3mm Pipe, Induction Bends and associated fittings
CHEVRON - GUJV GORGON Project GE Oil and Gas Logo GE Oil and Gas 8" x 18.3mmwt Pipe and Induction Bending
PETROBRAS PROJECT One Subsea Logo One Subsea - Leeds 6" Clad Gooseneck Turnkey Fabrication
PETROBRAS PROJECT One Subsea Logo One Subsea - Leeds 2" Flooding Cap Fabrications